atbm6441 is 2.4ghz, 1t1r, ieee 802.11b/g/n low power wi-fi chip with 2mbytes embedded flash memory. wi-fi can always be connected to ap and the system can be woken up via network.
general features • atbm6441 includes wi-fi protocol accelerator, low power mcu, multiple interface and power-management subsystem • support ieee 802.11 b/g/n and 20mhz bandwidth • 32bits cpu core with speed up to 160mhz • wi-fi can always be connected to ap with long battery lift and the system can be woken up via network • wi-fi protocol stack runs on chip, and support 20mbps sdio video transmission simultaneously • built-in 512kb sram • built-in 16m bits (2m bytes) spi flash memory and support firmware encryption protection in flash memory • built-in 1024bits efuse • support wep, wpa, wpa2, wpa3 personal, and aes128, tkip hardware crypto engine • update firmware via uart and spi, support ota by host soc via sdio interface • 24.0mhz crystal with internal oscillator • flexible rtc clock source from on-chip rc oscillator or external 32.768khz crystal. to use external 32.768khz crystal can reduce power consumption in sleep mode. • 3.3v single power or 3.3v and 1.4v dual power supplies for battery powered product • 6x6mm2, 48pin qfn package | peripheral interface • two channels 10bit sar adcs • 19 configurable gpios • 19 configurable pwm signal outputs, and output 12 channels pwm signal simultaneously • tow i2c interfaces, support master/slave mode • tow i2s interfaces, support input/output • multiple two wires and four wires uart • two standard spi, support master/slave mode • sdio 2.0 compliant interface |
battery powered products:
• ip camera
• smart door bell
• smart peephole
• smart door lock
for more technical documents, please click "login" or "register" and download from customer center.
technical support: contact us.